dit document beschrijft enkele nuttige snmpwalk commando's die je nodig hebt om SNMP in NMIS te troubleshooten

snmpwalk -v 2c -c <community> <host> 1.3.6.1.2.1.2.2.1.2 

voorbeeld:

iso.3.6.1.2.1.2.2.1.2.1 = STRING: "port 1: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.2 = STRING: "port 2: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.3 = STRING: "port 3: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.4 = STRING: "port 4: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.5 = STRING: "port 5: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.6 = STRING: "port 6: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.7 = STRING: "port 7: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.8 = STRING: "port 8: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.9 = STRING: "port 9: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.10 = STRING: "port 10: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.11 = STRING: "port 11: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.12 = STRING: "port 12: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.13 = STRING: "port 13: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.14 = STRING: "port 14: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.15 = STRING: "port 15: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.16 = STRING: "port 16: Gigabit Copper"
iso.3.6.1.2.1.2.2.1.2.52800 = STRING: "AUX"
iso.3.6.1.2.1.2.2.1.2.52801 = STRING: "Loopback"
iso.3.6.1.2.1.2.2.1.2.52802 = STRING: "Vlan-interface1"

1. ten tweede

voeg hier linken toe naar verdere uitleg